Symaga feed silos
Cost-effective feed storage with Symaga feed silos
The feed silos imported by Triotec provide a reliable and cost-effective solution for storing feed on modern livestock farms.
The silos use galvanized, profiled steel with a 600 g/m² coating. Over 37% more galvanization than other suppliers, which ensures better corrosion resistance and extends service life. The silo's maximum filling pressure is 1.2 Bar.
Eurocode-compliant, durable structure
Our feed silos are designed and sized according to EUROCODE standards. This guarantees:
- high structural safety
- a long-lasting and stiff structure
- reliable operation even in demanding weather conditions
High-quality, corrosion-resistant materials and careful surface treatment ensure the silo remains tight and operational year after year.
Contents of delivery
+ Pneumatic filling system
+ Galvanized filling pipe Ø 100 mm
+ PVC pressure-equalizing pipe Ø 160 mm
+ Ladders with safety cage
Safe and easy to use
Triotec feed silos focus on easy and safe operation:
- safe access routes, ladders and maintenance platforms
- inspection hatches and sight glasses to monitor contents
- designated maintenance points that speed up cleaning and inspections
Practical solutions reduce downtime and make daily work easier.
| MODEL | Ø M | BOTTOM CONE ° | capacity m3 | equipment |
|---|---|---|---|---|
| G01SG210G60M4 | 2.1 | 60° | 18.88 | Ladders, pneumatic filling system and pipes |
| G01SG250G60M5 | 2.5 | 60° | 33.60 | Ladders, pneumatic filling system and pipes |
Roof section
Technical features
- Optimal strength due to reduced corrugation and reinforced joint.
- Precise manufacturing facilitates installation.
- Roof angle 30º.
material
+ Steel: S350GD, EN 10346:2015 + Galvanization: Z600, according to EN 10346:2015 + Tensile strength: 360 N/mm²
+ Bending strength: 280 N/mm²
+ Thickness: e = 1 mm
Load collar
Technical features
- Sealing for working pressure in pneumatic silos.
material
+ Steel: DC04, EN 10039 + Galvanization: HDG EN ISO 1461:2023 + Thickness: e= 3 mm
Semi-automatic cover
Technical features
- Cover with locking and opening system for manual operation.
material
+ Steel: S280 GD EN UNE-EN 10346:2015 + Galvanization: HDG EN ISO 1461:2023 + Thickness: e= 3 mm
Wall sheet
Technical features
- Corrugation: 76×14 mm
- Height: 1440 mm
material
+ Steel: S350GD UNE-EN 10346:2015 + Galvanization: Z600 UNE-EN 10346:2015
+ Tensile strength: 510 N/mm2
+ Bending strength: 450 N/mm2 + Thickness: e= 0.8 - 1 mm
Bottom cone
Technical features
- Parts are designed with a shaped edge so they fit tightly to the outlet.
- The top attachment of the hopper to the cylinder is fixed from the flat part of the corrugation, preventing deformation and corrosion caused by screws.
- Discharge collar: diameter 440 mm and ground clearance 900 mm
- Maximum filling pressure 1.2 Bar
material
bottom cone
+ Steel: S350GD UNE-EN 10346:2015 + Galvanization: Z600 UNE-EN 10346:2015
+ Tensile strength: 510 N/mm2
+ Bending strength: 450 N/mm2 + Thickness: e= 1 - 2 mm
DISCHARGE COLLAR
+ Steel: S280 GD EN UNE-EN 10346:2015
+ Galvanization: Z600 UNE-EN 10346:2015
+ Thickness: e= 3 mm
Silo base
Technical features
- Omega profile legs
- Cold-rolled U-stiffener parts
- Anchor plates in the base
material
LEGS
+ Steel: S350GD UNE-EN 10346:2015 + Galvanization: Z600 UNE-EN 10346:2015
STIFFENERS
+ Steel: S280 GD EN UNE-EN 10346:2015
+ Galvanization: Z600 UNE-EN 10346:2015
+ Thickness: e= 3 mm
Bolts and nuts
Technical features
- Bolt coating facilitates installation and improves abrasion and corrosion resistance.
material
COATING
+ ZiNi UNE-EN ISO 4017-4030-7089
+ Hex and round head M8-M10 bolts.
Butyl tape
Technical features
- Supplied with double sealing tape to ensure optimal tightness.
material
+ Butyl sealing tape for sealing silo components